Service Hotline

+86 159 4094 5141

Home / All / Pillow Block Bearing /

SUNBEARING Pillow Block Bearing UCF206 Dark Green 30108108mm

Categories	Pillow Block Bearing
Brand	SUNBEARING Rolling Bearing Manufacturer
Model	UCF206
FOB port	DALIAN
Terms of Payment	L/C, Western Union, T/T, Paypal
Download
Update Time	Dec 22,2024

Contact Now

Favorites

Detail Information

Product Description

Product Name	Pillow Block Bearing UCF206
Structure	Pillow block Bearing	Seals	Rubber Seal
Bore Size	30mm	Bore Type	Round
Outside Diameter	108 mm	Duty Type	Medium Duty, Heavy Duty, and Others
Width	108 mm	Operating Temperature Range:	-20 to +120°C
Material	Chrome Steel, Carbon Steel, Stainless Steel	Lubrication Type:	Oil; Grease;
Cage	GCR 15, Stainless steel, etc.	Series:	UCF
Certificate	ISO9001:2008	Features	Suitable for high-speed operation, very durable, without frequent maintenance.
Colour	Dark Green	Bearing Structure	Spherical Surface Ball Bearing
The Number Of Rows	Single	Weight	1kgs
Clearance	C2 C0 C3 C4 C5	Tolerance	ABEC1 ABEC3 ABEC5 ABEC7

Adjustable Pillow block bearing installation:

1. To install the shaft bearing, must pull off the bearing sleeve fixed pin, while make the shaft neck surface smooth and clean, and in the shaft neck oiler and lubrication ( to allow the bearing on the shaft to rotate a little ).

2. Coated lubricating oil in the bearing seat and the bearing surface , arranged the bearing in a bearing seat. Then assembled together the bearing and the bearing seat ,push to the desired location for installation

3. Fixed bearing seat bolt but not to tighten, let the bearing in the bearing seat can rotate. Also install bearing and the other end seat on the same shaft , rotate the shaft several times, make the bearing itself automatically aligning position. Then fasten the bearing seat.

4. Eccentric sleeve. Put the eccentric sleeve on the inner sleeve of the eccentric step, and hand along the direction of rotation of the shaft to tighten. Then the small iron insert or withstand the eccentric sleeve on the sink hole with hammer along the direction of rotation of the shaft on small iron. The eccentric sleeve is firmly installed, the last lock on the eccentric sleeve in six hexagon screw.

Review